phone: 704.821.6651
fax: 704.821.7999


Changing Image
: Yaskawa >>   J1000 HOME SEARCH CONTACTS SITE MAP
Wednesday, May 24, 2017  

SpecificationsDocumentation






In our pursuit to create drives optimized for variable speed needs in compact applications, the J1000 is the solution. This micro-drive is simple and reliable with Yaskawa quality. Demand continues to increase for compact drives with hassle-free maintenance. Yaskawa drives have earned a reputation for high performance, high functionality, and high quality.

Peformance Features
  • Ratings:
    1/8 to 3HP at 200-240 VAC 1-ph
    1/8 to 5 HP at 200-240 VAC 3-ph
    1/2 to 7.5 HP at 380-480 VAC 3-ph
  • Overload Capacity:
    150% for 1 min. (Heavy Duty)
    120% for 1 min. (Normal Duty)
  • Control Method: V/f control
  • DC injection braking, ramp to stop
  • Electronic reversing
  • Adjustable accel/decel:
    0.0 to 6000 seconds
  • Controlled speed range: 40:1
  • Displacement power factor: 0.98
  • Output frequency: 0 to 400 Hz
  • Frequency resolution:
    0.01 Hz with digital reference
    0.06 / 60 Hz with analog reference
  • Frequency accuracy:
    0.01% with digital command
    0.5% with analog command
  • Volts / hertz ratio: infinitely adjustable pattern
  • DC Injection braking: adjustable amplitude, duration, current limited
  • Torque boost: full range, auto
  • Power loss ride-thru: 0.5 sec.
  • Speed search
  • Auto restart
  • 2 Critical frequency rejection settings
  • Slip compensation
Protective Features
  • Current limit, stall prevention during accel, decel, and run
  • Motor and drive overload
  • Over voltage
  • Instantaneous over current
  • Short circuit
  • Under voltage
  • Heatsink overheat
  • Ground fault protection
  • Over torque
Design Features
  • 16-bit microprocessor logic
  • Digital keypad operator
  • LED status display
  • Remote Mount Keypad Capability
  • 5 multifunction digital inputs
  • Programmable form C output contact for customer use:
    1A at 250 VAC or 30 VDC
  • 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
  • Carrier frequency: 15 kHz maximum; swing PWM
  • 8 multi-speed settings plus jog speed
  • Remote speed reference:
    0-10 VDC (20 kohms) or
    4-20 mA (250 ohms)
  • Signal follower: bias and gain
  • Analog monitor output:
    0-10 VDC proportional to output frequency or output current
  • 133 parameters
  • Cooling fan controlled by drive run/stop
  • UL and cUL listed; CE approved
  • UL recognized electronic overload
  • MTBF: exceeds 28 years
  • Protected chassis
  • Side by side mounting
  • Maintenance monitors
Service Conditions
  • Ambient service temperature:
    -10 to 50 C (14 to 122 F)
  • Ambient storage temperature:
    -20 to 60 C (-4 to 140 F)
  • Humidity: to 95% non-condensing
  • Altitude: to 3280 ft; higher by derating
  • Service factor: 1.0
  • Input voltage: -15% to +10%
    200 to 240 VAC, 380 to 480 VAC
  • Input frequency: +/-5%; 50/60 Hz
  • Phase sequence insensitive



REV DATE: 2/16/2009


2006 SCR Controls, Inc.
3479 Gribble Rd., Matthews, NC 28104
PO Box 2368, Indian Trail, NC 28079
email: info@scrcontrols.com

By viewing this site you agree with Terms of Use.

This sight is viewed best viewed with the latest versions of Netscape, Internet Explorer and Chrome.


A. Manufactured items:
MELLTRUM (SPECTRUM REPLACEMENT) ES100A ES125A ES150A ES150ARG ES200A ES200ARG ES222 ES2300RG ES2600RG ES2700 2400-8000 2400-8001W 2450-8000W 2450-8001W 2450-8010W 2450-8015W EDDY CURRENT CLUTCH 1235 367 FOCUS 2 FOCUS1 FOCUS 1 REPLACEMENT BOULIGNY MARK ANDY SECO BALDWIN ENKEL CUSTOM AUTOMATION SYSTEMS MULTI DRIVE SYSTEMS ERC REPLACEMENT.